Install Kubernetes which is the Orchestration System for Docker Containers.
For example, Configure Kubernetes Cluster with 1 Admon Node and 3 Container Node like follows.

Centos 7.2 Own kubernetes yum source,so yum install kubernetes,docker Because of the dependencies,Automatic installation!

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
									192.168.2.120
+---------------------+
| [ Admin Node ] |
|kubernetes-controller|

| |
+----------+----------+
|
+----------------------+ | +----------------------+
| [ kubernetes-node-1] | 192.168.2.121 | 192.168.2.122 |[ kubernetes-node-2 ] |
| node-1 +------------------+------------------+ node-2 |
| | | | |
+----------------------+ | +----------------------+
|
+----------+-----------+
| [ kubernetes-node-3] |
| node-3 |
| |
+----------------------+
192.168.2.123

Init all machine

[1] Master Node

1
2
sudo systemctl stop firewalld && sudo systemctl disable firewalld
sudo yum install -y ntp.x86_64

[2] all slave Node

1
2
sudo systemctl stop firewalld && sudo systemctl disable firewalld
sudo yum install -y ntp.x86_64

Configure Admon Node on this section.

[1] Install required packages.

1
[root@kubernetes-controller ~]# yum -y install kubernetes etcd flannel

[2] Configure Kubernetes.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
# generate RSA key
[root@kubernetes-controller ~]# openssl genrsa -out /etc/kubernetes/service.key 2048

[root@kubernetes-controller ~]# vi /etc/kubernetes/controller-manager

# line 7: add
KUBE_CONTROLLER_MANAGER_ARGS="--service_account_private_key_file=/etc/kubernetes/service.key"


[root@kubernetes-controller ~]# vi /etc/kubernetes/apiserver


#line 8:change
KUBE_API_ADDRESS="--address=0.0.0.0"

# line 17: change to Admin Node's hostname or IP address
KUBE_ETCD_SERVERS="--etcd-servers=http://kubernetes-controller:2379"

# line 20: IP range for Kubernetes service (change it if need)
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"

# line 26: add
KUBE_API_ARGS="--service_account_key_file=/etc/kubernetes/service.key"


[root@kubernetes-controller ~]# vi /etc/etcd/etcd.conf


# line 8: uncomment
ETCD_LISTEN_PEER_URLS="http://localhost:2380"

# line 9: add etcd Host's hostname or IP address
ETCD_LISTEN_CLIENT_URLS="http://kubernetes-controller:2379,http://localhost:2379"


[root@kubernetes-controller ~]# vi /etc/kubernetes/config


# line 22: change to Admin Node's hostname or IP address
KUBE_MASTER="--master=http://kubernetes-controller:8080"


[root@kubernetes-controller ~]# systemctl start etcd kube-apiserver kube-controller-manager kube-scheduler ntpd

[root@kubernetes-controller ~]# systemctl enable etcd kube-apiserver kube-controller-manager kube-scheduler ntpd

[3] Configure Flannel networking.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
# create new file
# specify network range you like which is used inside Container Nodes
[root@kubernetes-controller ~]# vi flannel-config.json
{
"Network":"172.16.0.0/16",
"SubnetLen":24,
"Backend":{
"Type":"vxlan",
"VNI":1
}
}


[root@kubernetes-controller ~]# vi /etc/sysconfig/flanneld

# line 4: change to Flannel Host's hostname or IP address
FLANNEL_ETCD="http://kubernetes-controller:2379"

# line 8: confirm the parameter
FLANNEL_ETCD_KEY="/atomic.io/network"


[root@kubernetes-controller ~]# etcdctl set atomic.io/network/config < flannel-config.json
[root@kubernetes-controller ~]# etcdctl get atomic.io/network/config
{
"Network":"172.16.0.0/16",
"SubnetLen":24,
"Backend":{
"Type":"vxlan",
"VNI":1
}
}

[root@kubernetes-controller ~]# systemctl start flanneld ntpd
[root@kubernetes-controller ~]# systemctl enable flanneld ntpd

[4] Make sure th settings. It’s OK if following result is displayed.

1
2
[root@kubernetes-controller ~]# kubectl cluster-info 
Kubernetes master is running at http://localhost:8080

Configure Container Node on this section.

[1] Install and Start Docker service on All Nodes, refer to here.

[2] Install Kubernetes and Flannel on All Nodes.

1
[root@kubernetes-node-1 ~]# yum -y install kubernetes flannel

[3] Configure Kubernetes on all Nodes like follows.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
[root@kubernetes-node-1 ~]# vi /etc/kubernetes/config
# line 22: change to Admin Node's hostname or IP address
KUBE_MASTER="--master=http://kubernetes-controller:8080"

[root@kubernetes-node-1 ~]# vi /etc/kubernetes/kubelet
# line 5: change
KUBELET_ADDRESS="--address=0.0.0.0"

# line 11: change to own hostname
KUBELET_HOSTNAME="--hostname-override=kubernetes-node-1"

# line 14: change to Admin Node's hostname or IP address
KUBELET_API_SERVER="--api-servers=http://kubernetes-controller:8080"


[root@kubernetes-node-1 ~]# vi /etc/sysconfig/flanneld
# line 4: change to Admin Node's hostname or IP address
FLANNEL_ETCD="http://kubernetes-controller:2379"


# stop docker0 interface
[root@kubernetes-node-1 ~]# nmcli c down docker0
Connection 'docker0' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/1)

[root@kubernetes-node-1 ~]# systemctl start flanneld kube-proxy kubelet ntpd
[root@kubernetes-node-1 ~]# systemctl enable flanneld kube-proxy kubelet ntpd
[root@kubernetes-node-1 ~]# systemctl restart docker

  • node-1 node add kubernetes get nodes status
1
2
3
[root@kubernetes-controller ~]# kubectl get nodes 
NAME STATUS AGE
kubernetes-node-1 Ready 1m
  • 2 nodes add kubernetes get node status
1
2
3
4
[root@kubernetes-controller ~]# kubectl get nodes 
NAME STATUS AGE
kubernetes-node-1 Ready 8m
kubernetes-node-2 Ready 1m

[4] Make sure th settings. It’s OK if the status of each node is Ready like follows.

1
2
3
4
5
[root@kubernetes-controller ~]#  kubectl get nodes
NAME STATUS AGE
kubernetes-node-1 Ready 37m
kubernetes-node-2 Ready 30m
kubernetes-node-3 Ready 22m

[5] 时间不同步会导致如下问题,同步主节点时间,重启服务即可解决:

1
2
3
4
5
[root@kubernetes-controller ~]# kubectl get nodes
NAME STATUS AGE
kubernetes-node-1 Ready 5h
kubernetes-node-2 NotReady 5h
kubernetes-node-3 NotReady 5h

时间一致性对于分布式应用程序来说,至关重要,稍有不慎导致,整个集群不可用,我就遇到很奇葩的问题,基础镜像源无法下载,待我同步所有节点时间重启所有服务之后居然,下载下来了。真奇怪,得多看看代码实现吧!不然就是一个黑盒子!难看透!后续章节创建pods就遇到时间不同步导致的问题!

原创文章,转载请注明: 转载自whoami的博客
本博客的文章集合: http://www.itweet.cn/archives/